Fully automatic non-tank pressure test equipment (double-unit type)
DNS-850
Product features
The four processes of water injection ⇒ pressure test ⇒ drainage ⇒ drying are all carried out automatically by conveyor. Since each process can process two pieces at a time, it is possible to increase the number of tests while saving space.
- The pressure-resistant joint is a press-type. (No screwing required, simple structure.)
- The maximum number of bottles that can be processed is approximately 50 per hour.
- Compatible cylinder are 10kg to 50kg. (*Siphon cylinder require air removal.)
Introduction example
Utsunomiya Propane cylinder Inspection Factory Co., Ltd.
Optimize operations by reducing labor and improving processing capacity
In preparation for publication
In preparation for publication
Fully automatic non-tank pressure test equipment
DNS-430E
Product features
The four steps of water injection ⇒ pressure test ⇒ drainage ⇒ drying are all carried out automatically using a conveyor. By using the optional "tag reader" and "re-inspection system", it is possible to create an automatic line without the need for an operator.
- The pressure-resistant joint is a press-type. (No screwing required, simple structure.)
- The maximum number of pieces processed is approximately 25 pieces/hour.
- Compatible cylinder are 10kg to 50kg. (*Siphon cylinder require air removal.)
Introduction example
Energy One Co., Ltd.
Pressure test capacity has doubled! Achieving greater efficiency
In preparation for publication
In preparation for publication
Simple non-tank pressure test equipment
DNJ-220F
Product features
One cylinder is fixed to each side of the device body, and pressure resistance tests are performed alternately on the left and right sides.
Work such as fixing cylinder, operating the valve when cylinder falls over, and attaching screw joints and metal fittings are all done manually, but the pressure test and drainage and drying processes are all performed automatically.
- Compatible with re-inspection systems, enabling efficient management of pressure resistance tests.
- Since the fixing and tipping is done automatically, it greatly contributes to labor saving.
- The maximum number of pieces processed is approximately 20 pieces/hour.
- Compatible cylinder range from 2kg to 50kg.
FAQ
FAQ
Q.
What level of work can be done with pressure test equipment?
A.
The fully automatic type automatically performs the entire series of pressure testing steps, including water injection, pressure resistance, drainage, and drying.
The simple type requires manual operation by an operator for fastening cylinder, attaching the fittings, and tipping, but the pressure-resistance process and drainage and drying process are performed automatically.
Q.
What types of cylinder can you accommodate?
A.
The fully automatic model is compatible with 10-50kg and 50kg siphon cylinder.
The simple type is available in 8-50 kg capacity, with a 50 kg siphon cylinder and an FRP cylinder (optional).
*Small cylinder and car cylinder can be handled with a manual type (manual pump type).
Q.
How many units can be processed for each specification?
A.
The maximum processing capacity is 25 to 30 bottles per hour for the fully automatic type and 15 to 20 bottles per hour for the simple type.
*Please note that the time required for filling with water, etc. varies depending on the type of cylinder, so please use this as a guideline.
Q.
Can I link it to the system?
A.
Re-inspection SystemIt is possible to link with.
The results of the pressure resistance test can be sent as data to the system, and reports such as report sheets, daily and monthly tables can be issued.
If you have trouble with industrial machinery
Please consult Daido Kogyo first.
Consultations take just one minute. For urgent inquiries, we can also assist you by phone.
