Deburring machine
Small brush deburring machine
UNI-DEBURRING
Product features
Simply press the steel against the brush,Inner burr, outer burrIt can remove them simultaneously.
- Equipped with a multi-clamp mechanism (patented). Can be used with any shape of steel material.
- Angle cutting adapter, moving table, and long auxiliary table can be set as options.
- The large opening makes brush replacement easy.
- Various brushes (iron, stainless steel, resin, etc.) suitable for steel materials can be selected.
*Patent No. 6429273
Product Specifications Table
| Maximum work size | Maximum: 90 mm x 125 mm Minimum: 25 mm x 25 mm Minimum length: 150 mm |
| Brush Rotation Speed | 1500/1700rpm |
| Brush automatic rotation speed | 60 rpm |
| Brush Drive Motor | AC200V 1.5kw |
| Brushed automatic motor | AC200V 0.4kw |
| Brush Size | 200Φ x 75w x 2 pieces |
Deburring processing sample
Before processing
After processing
Product Video
FAQ
FAQ
Q.
How short of a pipe can you deburr?
A.
The standard minimum length is 150 mm, and adapters for shorter lengths (100 mm) are also available.
Q.
Can angled burrs be removed?
A.
Angle adapter is optional.
However, please note that the steeper the angle, the larger the cross-section will be.
Q.
Can you chamfer the edges?
A.
It can remove burrs, but it cannot be used to chamfer or shave off edges.
Q.
Can the burrs on the aluminum be removed?
A.
Deburring aluminum is not recommended due to the risk of dust explosion. Please proceed at your own risk.
Introduction example
In preparation for publication
In preparation for publication
Related Products
If you have trouble with industrial machinery
Please consult Daido Kogyo first.
Consultations take just one minute. For urgent inquiries, we can also assist you by phone.
