Pipe bender (pipe bending machine)
CML bender
MB42P
Pipes made of iron, stainless steel, copper, aluminum, etc. can be bent without deformation.
Product Specifications Table
Maximum bending capacity
| cross section |
material |
External shape (Φ) |
Wall thickness (mm) |
| ○ | iron | 42 | 3.5 |
| ○ | stainless | 42 | 2.5 |
| ○ | copper/aluminum | 54 | 2.0 |
| ● | iron | 30 | ― |
Introduction example
Mr. Kumai, Co., Ltd.
Improved efficiency in handrail manufacturing. Production time reduced to approximately 1/4.
In preparation for publication
In preparation for publication
CML Top bender
TB60
Pipes made of iron, stainless steel, copper, aluminum, etc. can be bent without deformation.
Product Specifications Table
Maximum bending capacity
| cross section |
material |
External shape (Φ) |
Wall thickness (mm) |
| ○ | iron | 60 | 4.0 |
| ○ | stainless | 60 | 3.0 |
| ○ | copper/aluminum | 64 | 6.0 |
| ● | iron | 35 | ― |
Introduction example
CML bender
MG030
Pipes made of iron, stainless steel, copper, aluminum, etc. can be bent without deformation.
Product Specifications Table
Maximum bending capacity
| cross section |
material |
External shape (Φ) |
Wall thickness (mm) |
| ○ | iron | 76 | 4.0 |
| ○ | stainless | 76 | 3.0 |
| ○ | copper/aluminum | 76 | 6.0 |
| ● | iron | 45 | ― |
Introduction example
Ogawa Metal Works Co., Ltd.
Realized monthly cost reduction of 800,000 yen through in-house production
In preparation for publication
In preparation for publication
FAQ
FAQ
Q.
If I purchase the main unit, will it be able to be bent?
A.
The main unit alone cannot be bent.
A separate former and bending die are required for each pipe size to be bent.
*The main unit does not come with a former or bending die as standard.
Q.
How many degrees can it bend?
A.
It can be bent up to 180 degrees (into a U-shape).
Q.
Does it wrinkle or break when you bend it?
A.
The final result after bending depends on the pipe's material, wall thickness, and bending radius.
For more details, please contact us.inquiryplease.
Q.
I'm considering purchasing the MG030, but can it bend small-diameter pipes?
A.
Yes, it's possible. You'll need to purchase a pipe former and bending die separately.
Q.
The MG030 and TB60 are heavy (186kg), but can they not be moved without a crane?
A.
The unit has wheels at the rear, allowing it to be transported manually within the factory.
![](https://ferret-one.akamaized.net/resized_images/67ff1b63d759a61de7c8c599/original.{"image_content_type"=>"png"}?utime=1744771939)
If you have trouble with industrial machinery
Please consult Daido Kogyo first.
Consultations take just one minute. For urgent inquiries, we can also assist you by phone.
