3-Roll bender
Ring Roller bender
Product features
- The position of the center roller is displayed on the operation panel in units of ±0.1 mm.
- The twist of the material during processing can be adjusted by the straightening rollers installed on the inlet and outlet sides.
- It can be used in both vertical and horizontal orientation.
Product Specifications Table
■ Please download the catalog for details.
|
Model |
Setting | Shaft diameter | weight |
| ECO40 | manual | 40mm |
300kg |
| CE40MR3 | manual | 40mm | 330kg |
| CE50H3 | Hydraulic | 50mm | 460kg |
| CE70H3 | Hydraulic | 70mm | 1300kg |
| CE100H3 | Hydraulic | 100mm | 2500kg |
FAQ
FAQ
Q.
Can you bend pipes?
A.
The standard specifications include bending of angle iron, flat bars, and square pipes, but you can also bend pipes by purchasing a pipe roller separately.
Q.
Is it possible to bend it at an angle (45 degrees, 90 degrees, etc.)?
A.
This machine is for creating gentle curves and rings. Angled bending is available separately.Pipe benderWe handle this product.
Q.
Please explain the differences between the CE40 and CE50 machines.
A.
The CE40 uses manual control to lower and raise the center roller. The CE50, on the other hand, uses a hydraulic pump and a foot switch to control the lowering and raising of the roller, and has more power than the CE40, allowing it to machine larger diameters.
Q.
Can the machine be used with the main unit lying on its side (rollers facing upwards)?
A.
Yes, it's possible. For long processed parts, facing upwards is easier to use as it avoids interference.
Introduction example
In preparation for publication
Related Products
If you have trouble with industrial machinery
Please consult Daido Kogyo first.
Consultations take just one minute. For urgent inquiries, we can also assist you by phone.
